Home > POWER SOLUTIONS/ CHASSIS > Power Supply / Power Adapters > Power Supply > Power Supply Replacement Center > COMPATIBLE HP POWER SUPPLY REPLACEMENT > OEM HP Compatible 200W Micro ATX mATX Power Supply, PS3 form factor. Replacement Power For 0950-4270, 0950-4107, 0950-4097, 5185-2974, 0950-2700, 0950-2800, 0950-3426, 0950-3623, 0950-3751,?0950-3961, 5184-3961, HIPRO HP-A1507F3, Bestec ATX-1956F, Bestec ATX-1951D, BESTEC ATS-100, BESTEC ATS-150, LITEON PS-6161-2H1, DELTA DPS-160GB B, DELTA DPS-110MB-1 & More*   
|
OEM HP Compatible 200W Micro ATX
mATX Power Supply, PS3 form factor. Replacement Power For 0950-4270,
0950-4107, 0950-4097, 5185-2974, 0950-2700, 0950-2800, 0950-3426, 0950-3623, 0950-3751,
0950-3961, 5184-3961, HIPRO HP-A1507F3, Bestec ATX-1956F, Bestec ATX-1951D, BESTEC
ATS-100, BESTEC ATS-150, LITEON PS-6161-2H1, DELTA DPS-160GB B, DELTA DPS-110MB-1 &
More* Substitute power supply for the following Hewlett Packard model:
- HP Pavilion 304W, 325C, 354N, 364N, 374N,
503G/N/W/X, 504N, 505N, 505W, 506X, 513 CTO, 513C/G/M/N/W/X, 514C/N/X,
515N/X, 516X, 522 CTO, 523 CTO, 523N, 524C/G/W, 525C/W/X, 526X, 533
CTO, 533C/W, 542 CTO, 543 CTO, 543X, 544N, 545X, 552
CTO, 553W/X, 554E CTO, 554X, 554Y CTO, 555E CTO,
555F CTO, 562 CTO, 563W, 564W, 564X, 573 BTCO 576x,
700 CTO, 701 CTO, 703c, 710 CTO, 713c, 716n, 724c,
725n, 733n, 734k, 735n, 743 CTO, 743c, 743g, 744k, 744v, 746c, 750 CTO,
751 CTO, 752 CTO, 753 CTO, 753C/N, 754N/V, 755V, 760
CTO, 761 CTO, 762 CTO, 763 CTO, 763C,
764C/N/X, 772 CTO, 774E CTO, 774Y CTO, 775E
CTO, 775Y CTO, 7800 CTO, 780N, 783 CTO,
783C, 792 CTO, 793 CTO, 793c, 794C/N, 854/N, 864/N, 876X, 884,
884N, 886C, 894C, 896C, 6329, 6330, 6331, 6333, 6336, 6337, 6340, 6343, 6346, 6350,
6351, 6353, 6355, 6356, 6357, 6360, 6370Z, 6408, 6409,6460, 6465, 6466, 6468, 6470Z,
6475Z, 7842, 7864, 7867, 7875, 78XX, 7900 CTO, 7905 CTO
7910 CTO, 7935, 7955, 7965, 7975, 8400CTO, 8400A/B/C/D/E/F/G/H/J/K/L/M/N/P/Q/S/T CTO, 8500 CTO,
8562, 8565C, 8566C, 8570C, 8575C, 8576C, 8578C, 8580C, 8586C, 8590C, 8595C, 8650C,
8652C, 8655C, 8656C, 8660C, 8662C, 8665C, 8668C, 8670C, 8676C, 8693C, 8750C, 8754C, 8755C,
8756C, 8760C, 8762C, 8765C, 8766C, 8770C, 8772C, 8775C, 8776C, 8785C, 8860, 8870, 9680C,
9682C, 9686C, 9688C, 9690C, 9692C, 9694C, 9695C, 9780C, 9790C, 9800 CTO,
m300y CTO, XL753, XL754, XL756, XL759, XL761, XL766, XL768, XL773,
XL776, XL866, xt860, xt865, xt878, xt958, xt959, xt978 XT983, XP788, XP789, and
more!
- HP Media Center 863N, 873N, 883N, M200Y
CTO, M260N, M270N, M270, M280N, M370N, M376N, M377N, M380N, M380, M385C, M390N,
M476N, and more.
***Important
note about our OEM HP replacement power supply:
- OEM compatible replacement power
does not have a 3-Pin Connector (P7 or P9) for motherboard power supply fan control.
The newer power supplies have this feature already built-in to the power supply and
operates without this connector.
Unit connectors:
- 1x 20-Pin ATX Connector,
- 5x Peripheral Connectors,
- 1x Floppy Connectors,
- 1x 4-Pin 12V (P4) Connector,
and
- 1x 4-Pin Video Power Connector.
Note: Simply tie off the unused
connectors: floppy connector & the extra peripheral connectors when not in use by your
computer. This will not cause any harm to the system or its performance.
Features:
- Dimension: 5.9" x
3.9" x 3.4"
- The higher wattage means our
replacement delivers more power than the original part which enables support for more
add-on peripherals (hard drive, CDRW, DVDRW etc.). It's a feature that will benefit,
not harm your system performance.
- High efficiencyLow Ripple
& Noise
- Output over voltage
protection
- Short circuit protection on
all outputs
- Reset table power shut down
- Approved by UL CSA TUV IEC
NEMKO CB&CE
- INTERNAL 12 VDE fan
provided
- 100% burn-in under high
ambient temperature(50¢XC)
- Vacuum-impregnated
transformer
- MTBF: 100K hours at 25¢XC
- 100% Hi-pot tested
- Line input fuse protection
- Passive PFC Circuit at 230Vac
Input Characteristics:
- Voltage: 190-264 VAC switch
able
- Frequency: 47 Hz to 53 Hz
- Input current: 4.0 maximum/
230Vrms, 50Hz
|
Specifications:
- Remote ON/OFF Control:The power supply
shall accept a logic collector level which will disable / enable all output
voltage(excluding +5V standby)
- Temperature range:
operating 0¢XC~50¢XC, Non-operation:-20¢XC~65¢XC
- Temperature coefficient:
0.01%/¢XC
- Transient response: output
voltage returns in lessThan 1 ms max . following a 25% load change
- Hold-up time: 10.0ms
minimum - at 230V/50Hz
- Dielectric withstand: input
/ output 1800VAC for 1 second,
Input to frame ground 1800VAC for 1second
- Humidity: 5~95% RH
- Efficiency: 60% min. at
full load
- Power good signal: Power on
delay time 100ms to 500 ms
- Overload protection:
150%max.
- Inrush current: 50Acold
.70%typical, at full load
- Over voltage protection:
+5V output: 6.5V max
+3.3V output: 4.6V max
+12 output: 15.5Vmax
|
Output
Characteristics:
| Output Voltage |
Minimum Load |
Normal Load |
Maximum Load |
Load Reg. |
Line Reg |
Ripple & Noise |
| +3.3V |
0.5A |
8.3A |
3.9/16.7A |
+5% |
+1% |
50mVP-P |
| +5V |
1.0A |
6.3A |
21/12.6A |
+5% |
+1% |
50mVP-P |
| +12V |
2.0A |
2.7A |
10A |
+5% |
+1% |
120mVP-P |
| -12V |
0.0A |
0.25A |
0.5A |
+10% |
+2% |
120mVP-P |
| -5V |
0.0A |
0.1A |
0.2A |
+10% |
+2% |
120mVP-P |
| +5Vsb |
0.0A |
1.0A |
2.0A |
+5% |
+1% |
50mVP-P |
|
|
