OEM Compatible Power Supply replacement for: HP Pavilion 900 CTO, 901 CTO, 950 CTo, 951 CTO, 8100, 8110, 8111, 8120, 8130, 8140, 8155P, 8160, 8165, 8175, 8176, 8180, 8190, 8201, 8208 (H), 8215, 8220, 8225, 8230, 8240, 8241, 8246, 8250, 8261, 8275, 8276, 8280, 8290, 8300 A/B/C/D CTO, 8315 (H), 8316, 8318, 8328, 8360, 8366, 8370, 8380, 8390, 8395, 8396, 8400 A/B/C/D/E/F/G/H/J/K/L/M/N/P/Q/S/T CTO, 8480Z, 8485Z, 8490, 8495, 8496, 9760, 9795C, 97XX, 9800 CTO, 9810, 9850, 9851, 9853, 9855, 9870, 9871, 9880, 9888, 9895, 9910, 9971, 9977, 9995, XV976, Brio BA410, and more.

Features:

• The higher wattage means our replacement delivers more power than the original part which enables support for more add-on peripherals (hard drive, CDRW, DVDRW etc.).  It's a feature that will benefit, not harm your system performance.
• External Dimension: 5.5" x 5.9" x 3.4"
• High efficiency
• Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all output
• Reset table power shut down
• Approve by UL, CSA TUV, NEMKO, FCC
• Internal 12V DC fan (ball bearing)
• 100% burn-in under high ambient temperature(50 degrees C)
• Vacuum-impregnated transformer
• MTBF: 100K hours at 25 degrees C
• 100% Hi-pot tested
• Line input fuse protection
• With Fan Noise Killer

***Important note about our OEM HP replacement power supply: 

OEM compatible replacement power does not have a 3-Pin or 6-Pin Connector (P7 or P9) for motherboard power supply fan control.  The newer power supplies have this feature already built-in to the power supply and operates without this connector.

Unit connectors:

• 1x 20-Pin ATX Connector,
• 5x Peripheral Connectors,
• 2x Floppy Connectors,
• 1x 4-Pin 12V (P4) Connector, and
• 1x 6-Pin Auxiliary Connector.
  Note:  Simply tie off the 6-Pin Auxiliary connector, floppy connector & the extra peripheral connectors when not in use by your computer.  This will not cause any harm to the system or its performance.