  
|
Features:
- High efficiency switching power supply
- Low ripple &Noise
- Output Voltage Protection OVP
- Short circuit protection on all output
- Reset table power shut down
- Approve by UL, CSA, TUV, NEMKO, CE
& IEC
- 100% burn-in under high ambient
temperature (50 degrees C) vacuum-impregnated transformer
- MTBF: 100K hours at 25 degrees C
- 100% Hi-pot tested
- Line input fuse protection
Input Characteristics:
- Voltage: 115/230 VAC
- Frequency: 47Hz to 63Hz
- Input current:
10A max/ 115 Vrms, 60Hz
5A max./ 230 Vrms, 50 Hz
|
Specifications:
- Remote ON/OFF Control: The Power supply
shall accept a logic open collector level which will disable /enable all out put voltage
(excluding +5V standby).
- Temperature range: operating 0degrees
C~40degrees C, storage-20degrees C~ +65degrees C
- Temperature coefficient: 0.01% /
0?#60;/font>
- Transient response: output voltage
recovers in less than 1 ms max. following a 25%load change
- Hold-up time: 16ms minimum at full load
& nominal input voltage
- Humidity: 5~95% RH
- Efficiency: 65-70% typical at full load
- Power good signal: turn-on delay 100ms
to 500ms
- Dielectric withstand: input / output
1800VAC for1 second, input to frame ground 1800VAC for 1 second
- Overload protection: 150% max.
- Inrush current: 60A cold, 80A warm at
132VAC
- Fan Noise Killer Standard
- Over voltage protection:
+3.3V, +5V, 30% Voltage range
|
|
|
