Dimension: 5.9" x 5.5" x 3.4"

Features:

• High efficiency
• Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all output
• Reset table power shut down
• Approve by UL, CSA TUV, NEMKO, FCC, CE(Only for PFC)
• Internal 12V DC fan (ball bearing)
• 100% burn-in under high ambient temperature(50¢XC)
• Vacuum-impregnated transformer
• MTBF: 100K hours at 25¢XC
• 100% Hi-pot tested
• Line input fuse protection
• Passive PFC optional
• With Fan Noise Killer

Input Characteristics:

• Voltage: 230VAC
• Frequency: 47Hz to 63Hz
• Input current:
  9.0A maximum / 115V, 60Hz
  5.0A maximum / 230V, 50Hz

Specifications:

• Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).
• Temperature range: operating 0¢XC~50¢XC, storage-20¢XC~+65¢XC
• Temperature coefficient:0.01%/¢XC
• Transient response: output voltage recovers in less than 1 ms max. Following a 25%load change
• Dielectric withstand: input / output 1800VAC for1 second,
  input to frame ground 1800VAC for 1 second
• Humidity: 5~95% RH
• Efficiency: 65% min. 70% typical, at full load
• Power good signal: turn-on delay 100ms to 500ms
• Overload protection: 150%max
• Inrush current: 60A cold, 80A warm at 264 VAC
• Over voltage protection:
  +5V output: 6.5V
  +3.3V output: 4.6V
  +12V output: 15.5 V

Output Characteristics:
+3.3V- 15/28A
+5V- 30/21.5A
+12V- 15A
-12V- 0.8A
-5V- 0.3A
+5vSB- 2.0A