  
|
Output Wattage |
200W |
Mechanical Type |
ATX12V-1U |
Dimension |
Width: 100mm(3.9"), |
|
Length: 200mm(7.87"), |
|
Height: 40.5mm(1.6") |
AC Input Spec |
100V@4.0A/60Hz ~ 240V@2.0A/50Hz,
Auto-Sensing |
|
|
DC Output Spec |
Voltage |
3.3V |
5V |
12V |
-12V |
-5V |
5Vsb |
Current |
14A |
21A |
10A |
1.0A |
0.5A |
3.0A |
Combined Load |
130W |
|
|
|
Connectors:
- 1x ATX 20-Pin Motherboard
Power Connector
- 1x 12V 4-Pin P4 Power
Connector
- 5x Hard Disk/ Peripheral
Drive Power Connector
- 1x Floppy Drive Power
Connector
ENH-0620 has been discontinued by the
manufacturer.
The recommended replacement model is the FLEX-0130D, also by
Enhance Electronics. Same physical dimension, 300W instead of 200W which means that
it has the capacity to support more peripherals. The FLEX-0130D does not have -5V like the ENH-0620. This
could be a problem for older systems.
Please reference system manual for more details and compatibility. |
|
ENH-0620, ENH-0630, and ENH-0635A have been discontinued.
Click to see Enhance Electronics' recommended replacement: FLEX-0130D
Note: This replacement can be used for IPUMPS that were
using the ENH-0635A power supply.
|