  
|
150W Micro ATX Power
Supply, SFX form factor. OEM Compatible Power Supply None P-4 Replacement For 944, Ilsan ISP-120S, Bestec ATX-100-5, ATX-150, ATX-1523D,
ATX-1523F and for the following E-Machines:
- Emachine etowers, emonsters, and others except
the E-One Model.
- E-Machine Models: 266, 300, 300C, 300K, 333C, 333CS, 333K,
333I, 333ID, 366I, 366ID, 366C, 366IS, 366I2, 400I2, 400ID, 400IDX, 400IX, 400I, 400I3,
433I, 466I, 466ID, 466IS, 466IX, 500I, 500ID, 500IDX, 500IS, 500IX, 533ID, 533IR, 533I,
533ID2, 566I, 566I2, 566IRX, 566IR,
- Also works with eMonster 500, 500A, 550, 550R, 600, 700,
800, and more.
5 Output Power Connectors
including:
- (1) 20-Pin ATX Motherboard Connector
- (3) Peripheral Connectors &
- (1) Floppy Drive Connector
Features:
- High Efficiency
- SFX Rev 1.1 Compliant
- 5 Output Power Connectors
- 80mm Cooling Fan
- Remote On/ Off
- Power Good TTL Signal
- Short Circuit, Over Current, & Voltage Protection
- Auto-Sensing Thermal Control
- Low Acoustic Noise
- Energy Star, UL, CSA, CE Approvals
- AC Input is positioned on the long
side (4.9") of the power supply
- 3 Mounting Holes on Each Side
| Output Wattage |
150W |
| Mechanical Type |
SFX-H |
| Dimension |
Width: 125mm (4.9"), |
|
Length:100mm(3.9"), |
|
Height: 63.5mm(2.5") |
| AC Input Spec |
100 ~ 127V@6.5A/60Hz or 200~240V@3.0A/50Hz;
Manual Select |
|
|
| DC Output Spec |
| Voltage |
3.3V |
5V |
12V |
-12V |
-5V |
5Vsb |
| Current |
7A |
12A |
5A |
0.3A |
N/A |
0.8A |
| Combined Load |
83W |
|
|
|
